Introduction

The Repeater allows you to strengthen and expand you existing Smart network. Integration is as simple as connecting it to mains power and the Repeater will configure itself automatically.

Table of Contents

• Placement Considerations
• Status Indicator

Placement Considerations

The Repeater should always be in range of your existing Smart network, e.g., have a good RF connection to at least one of the Smart devices in your network. The Repeater has an optimized internal antenna. The two main factors influencing the quality of the RF connection are the distance between the Repeater and closest Smart device, and obstacles blocking the direct line-of-sight between them. For example, a metal enclosure will result in a worse RF performance as compared to a plastic housing. 

Status Indicator

At the center of the Repeater a status indicator is installed to indicate the current status of the Repeater. The table below shows the possible colors of this indicator with the according status message. The color of the indicator can be seen better from a distance.

	OFF	No power; check power supply voltage
	RED	Internal failure; contact Bever Innovations
	GREEN	Normal operation
	YELLOW	Configuration mode (connected to tablet/phone)