Communicator Volt (1-10V) Dongle - Settings Overview

Created by Bever Innovations, Modified on Fri, 27 Oct, 2023 at 1:38 PM by Arjen Groenenberg

Basic

*Name*	*Values*	*Description*	*Default*
Default Output
Output percentage	[0-100]%	Default output percentage. Only works when device is in Smart network and group.	100%

Advanced

*Name*	*Values*	*Description*	*Default*
Output range
Output voltage (x10) 0%	[0-100]	Output voltage at 0%. Devide setting by 10, meaning 10 will result in 1V at the output.	10
Output voltage (x10) 100%	[0-100]	Output voltage at 100%. Devide setting by 10, meaning 100 will result in 10V at the output.	100
Smart
Device network identifier	[1-30]	Smart network ID	255 (Not set)

Expert

*Name*	*Values*	*Description*	Default
Output tuning
Scaling factor	0-1000	Output tuning value. When 100% output setting does not reach 10V at the output, increase this value.	960
Force 0 percent to 0 volt	ON/OFF	When receiving a 0% level, set output to 0V even when 'Output voltage (x10) 0%' is not 0.	OFF